Flowservices FAQ Where do the sensors go

Where do the sensors go?

Generally on the pipe…. However we do recommend that you install the sensor at least 10 times the diameter away from bends, T pieces, flanges, joins, pumps etc. Eg: If you pipe is 50mm in diameter, in an ideal application you should install the sensors 500mm away from any obstructions.

Related Post

Flowservices would like to welcome i2O as our new supplier! i2O provides a suite of smart network solutions to help water utilities respond to the challenges created by an increasing and urbanising population, more extreme weather events, ageing infrastructure, more demanding customers and constraints on expenditure. More than 100 utilities in over 30 countries around [...]

Pumping pregnant liquor from the digestion stage to clarification tanks is commonly done in aluminium refineries. The solution is hot, highly corrosive and accurate flow measurement is challenging. We found early tests using clamp on ultrasonic flowmeters have yielded great results. Equipment used: Flow measured using a Flexim Portable F601 with special high power transducers. […]