Alumina Refinery Case Study for Mining

Pumping pregnant liquor from the digestion stage to clarification tanks is commonly done in aluminium refineries. The solution is hot, highly corrosive and accurate flow measurement is challenging. We found early tests using clamp on ultrasonic flowmeters have yielded great results. Equipment used: Flow measured using a Flexim Portable F601 with special high power transducers. […]

Continue Reading

Our Free Essential Flow Survey Guarantees Results

The easiest way to try out ultrasonics is with a flow survey; this service is highly recommended before finalising a quotation. It is free and without obligation and allows both parties to achieve the following:

Continue Reading

Flowservices Structural Changes – Still Bringing You Great Service

Flowservices are proud to have supplied and serviced Australia for over 10 years in ultrasonic flowmeters. We have a long standing partnership with Flexim, the incredible creators behind the main meters we use. The German manufacturing is second to none, and in fact they are so reliable that we include a personal guarantee on every […]

Continue Reading

Mains Insertion Mag Testing

Ultrasonic flowmeters were introduced by Tokyo Keiki in Japan in 1963, as a far more cost effective solution for measuring flow. We have been working with ultrasonic flowmeters and mains insertion mag testing for over 15 years and guarantee them because we know they work.

Continue Reading

The Smart Way To Measure Pump Flow Rate

We read with interest this article in a recent edition of Pumping Industry. Pumps are the heartbeat of most industries transporting liquid, air or slurry. That is why it is critical to measure pump flow rate efficiently and accurately.

Continue Reading

Real Life Application: On Site Flowmeter Validation

Alan recently completed an on site flowmeter validation test to confirm flow in a newly installed magflow meter. A local council were concerned that the new magflow meter that had been installed was not reading the flow correctly. There was no other simple way to confirm that the flow was accurate.

Continue Reading

Introducing our PARTNERS in Flexim

At Flowservices we are proud to have worked with Flexim for over 10 years, supplying Flexim Ultrasonic Flowmeters Australia wide – even to our neighbouring countries! Since starting out with Flexim over a decade ago, we now have reps in every state of Australia. We have worked with these partners in the industry for years […]

Continue Reading

Real Life Application: Using Ultrasonics to Measure Flow in a Buried Pipe

On a recent visit to far North Queensland last week, we were asked to measure flow in a huge pipe, that was mostly buried underground. With a tropical storm brewing, the recording had to be done as quickly as possible without disturbing the environment.

Continue Reading

Measuring solutions for WATER

  At Flowservices, the majority of enquiries we receive all revolve around measuring water, in all sorts of locations around Australia, with various types of pipes and applications.   If you are looking to measure water in any type of scenario, we are confident we can assist you and if we just can’t do it, […]

Continue Reading

Buried Flowmeter That Is More Accurate and Efficient Than The Rest

Newly released technology from industry giant Flexim means you can now measure flow in buried pipes more effectively, accurately and efficiently for a low cost compared to insertion mag flowmeters with the WD100 buried flowmeter.   At Flowservices, we are excited to be able to bring you this technology directly from Germany and can assist […]

Continue Reading